Sentek LMC-J-0040-1 Instrukcja Użytkownika Pobierz pdf (Strona 26)

IMJ00503 V3E.DOC Page 26 of 40 19.02.2009

The wiring diagram for utilization of alarm outputs is as follows:

Fig. 7: Wiring for alarm outputs

4.8 Trigger Input

Parameter settings for the trigger input can be made using Profibus tools. This

function is only enabled with the Profibus in active state.

The trigger input allows a distance measurement cycle to be triggered by an external signal that

is applied as a voltage pulse.

Available setting options are the delay time (Trigger Delay) until measurement actually starts

and the pulse edge to be selected for triggering (Trigger Level). Trigger mode (0 ... Off, 1 ...

On) must be turned on.

Parameter settings for Trigger Input can be made with the help of the Profibus Master, using

the Encoder profile and Class 2 encoder functionality.

green

red

green

red

Setup

Power Supply

Control

white

brown

green

yellow

gray

orange

blue

red

black

violet

white/brown

white/black

Device

Terminal

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 38 39

Brak uwag

Sentek LMC-J-0040-1 Instrukcja Użytkownika Strona 26